Vente de produits 89270;TOPAS PMWS - OBSOLETE - Integra Metering AG (formerly Aquametro) en France 

Marque Integra Metering AG (formerly Aquametro)
Produit 89270;TOPAS PMWS - OBSOLETE
Description Nominal flow: Qn = 10; Nominal diameter: DN 40; Reporting: 1 liter of 1impuls
Code intérieur FBR175132
Poids 1

Vous pouvez nous contacter en France dans le but d'obtenir un devis avec prix et délai de livraison si vous cherchez le produit Integra Metering AG (formerly Aquametro) - 89270;TOPAS PMWS - OBSOLETE Nominal flow: Qn = 10; Nominal diameter: DN 40; Reporting: 1 liter of 1impuls . Nous pouvons également vous proposer des produits d'autres marques et fabricants avec les meilleurs conditions de vente. Grâce à notre réseau de partenaires en Allemagne et à l'étranger, nous essayons de vous donner des prix compétitifs et des délais de livraison courts pour Integra Metering AG (formerly Aquametro) - 89270;TOPAS PMWS - OBSOLETE Nominal flow: Qn = 10; Nominal diameter: DN 40; Reporting: 1 liter of 1impuls . Mais notre entreprise n’est pas un distributeur officiel sous contrat.

Les marques et les produits indiqués sur notre site sont des exemples à tittre informatif. Nous respectons strictement les droits de propriété privée des constructeurs respectifs.

Notre société n'est pas un distributeur agréé. Tous droits sont réservés aux fabricants et à leurs partenaires officiels.

Mêmes produits de Integra Metering AG (formerly Aquametro)

92049 VZO 20 FL 130/25

Fuel-oil fuel meter

92059 / VZO 25 FL 130/25

compteur d'huile

93533

[AMBUS IS M-Bus Impulssammler 1 Impulseingang 2 Leiter M-Bus Schnittstelle 2 Leiter Energieversorgung aus AMBUS ZS oder Net]

94249

PMG 32-RH1 6.0_260_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0,075 m³ / h Continuous flow qp: 6 m³ / h Maximum flow qs: 12 m³ / h Kvs-value: 12.7 m³ / h Pressure loss at qp: 0,22 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004

94252 PMGF 32-RH1 5.0_150_1 1/4"

Size: DN 32 with thread 1 1/2 "(for screw 1 1/4") Nominal pressure: PN 16 bar length: 150 mm Mounting position: vertical falling temperature max .: 130 ° C Maximum flow qs: 6.3 m3 / h Nominal flow qp: 5 m3 / h minimum flow qi: 0.1 m3 / h pulse value: 1 l Smallest readable amount: 0.1 l registrable: 99,999 m3 measuring principle: multi-jet impeller, dry running With CE marking

94255

PMGS 32-RH1 5.0_150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical ascending Riser counter Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0.1 m³ / h Continuous flow qp: 5 m³ / h Maximum flow qs: 6,3 m³ / h Kvs-value: 13.6 m³ / h Pressure loss at qp: 0,14 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004

94525 50 50_200

MeiStream RUBIN Kaltwasserzähler Nenngrösse: DN 50 Flanschanschluss: EN 1092-1 Nenndruck: PN 16 bar Baulänge: 200 mm Einbaulage: horizontal/vertikal Schutzart: IP 68 Temperatur max.: 50°C Überlastungsdurchfluss Q4: 90 m3/h Dauerdurchfluss Q3: 50 m3/h Übergangsdurchfluss Q2: 0.4 m3/h Kleinster Durchfluss Q1: 0.15 m3/h Kleinste ablesbare Menge: 0.5 l Registrierfähigkeit: 1 Mio m3 Messprinzip: Woltman-Turbine Messbereich Lieferkennzeichnung: R 100

94604

PMW-basic 32 10._260_1 G1 / 4; Multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 12.7 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001

94606

PMWF-basic 32 10._150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 10.3 m³ / h Pressure loss in Q3: 900 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001

94607

PMW-basic 16._300_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Thread connection: G 1 " Nominal size: DN 40 Mounting length: 300 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.16 m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 25.6 m³ / h Pressure loss in Q3: 400 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001

94608

PMWS-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical ascending Riser counter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 20.8 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001

94609

PMWF-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 22.2 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001

96166.

CE test water meter R49 DN15-32

96167

CE test water meter R49 DN40-50

ART.NO. 80113/2008 AQUAPULS 1L

Electronic reading system IP68

ART.NO. 83527 RV1/RD 20

Last crop per meter

ART.NO. 92048 VZO 20 RC 130/16-RV1

CONTOIL® oil meter VZO 20 RC 130/16-RV 1 Ring piston meter for mineral oil, with rotatable roller counter

P/N 92280, VZF 50 FL 180/25

P/N 92280 Aquametro Oil Meter

P/N 94101

G/E F.O SUPPLY FLOW METER

P/N: 89763 VZO 4 -RE 0,00125

[CONTOIL ® fuel oil meters Reed pulser Pulse value 1.25 ml Nominal width: 4 mm With internal thread copper pipe: 1/8 " Nominal pressure: PN 25 Maximum permissible temperature: 50 ° C Mounting position: horizontal / vertical Largest flow Qmax. 80 l / h In continuous operation: 50 l / h Error of measurement: 1-80 l / h + / - 1% of the measurement error Recording capacity Roller 100 000 liters With built-on Reed pulser RE max:. 48V AC / DC, max. 50 mA, max. 3 VA Pulse value: 0.00125 l]

TMC19321

vzo-4 fuel counter

VCS04

MOTOR AC230V 50/60HZ DN25 WITH CAPACITOR AND GEAR FOR ACTUATOR TYPE: 2KN:

VZ020

fuel counter gear

VZ025

fuel counter gear

VZO 15 RC 130/16-RV0,1

(92042,CONTOIL® Ölzähler mit Reed-Impulsgeber Impulswert 0,1 l, Nennweite: DN 15 mm Mit Gewinde 3/4" für Verschraubungen: 1/2" Baulänge: 165 mm Nenndruck: PN 16 bar Max. zulässige Temperatur: 130°C Einbaulage: horizontal/vertikal Grösster Durchfluss Qmax.: 600 l/h Im Dauerbetrieb Qn.: 400 l/h Kleinster Durchfluss Qmin.: 10 l/h Messabweichung: 10 - 600 l/h ± 1 % vom Messwert Wiederholbarkeit gleich/besser als: 0,2 % Menge total auf Rollenzählwerk: 1 000 000 l Kleinste ablesbare Menge: 0,01 l Impulsgeber Reed,max.48 V AC/DC,50 mA,2 W Impulswert: 0,1 l Messprinzip: Ringkolben)

VZO-15

fuel meter

94606 PMWF-basic 32 10._150_1 1/4"

Compteur d'eau chaude TOPAS, Taille nominale : DN 32, Avec filetage 1 1/2 « (pour vis 1 1/4"), Pression nominale : PN 16 bar, Longueur totale : 150 mm, Position de montage : chute verticale, Température max. : 90° C, Débit de surcharge Q4 : 12,5 m3/h, Débit permanent Q3 : 10 m3/h, Débit de transition Q2 : 12 : 16 m3/h, Débit minimal Q1 : 0 1 m3/h, Plage de mesure : R 100, Quantité lisible la plus petite : 0,1 l, Enregistrable : 100000 m3, Principe de mesure : turbine multi-jets, fonctionnement à sec

Contactez-nous pour une demande