| Marque | Integra Metering AG (formerly Aquametro) |
| Produit | PN: 91903 Type: VZO 20FL 130/25-INO,01, |
| Description | Compteur d'huile |
| Code intérieur | FBR4028094 |
Vous pouvez nous contacter en France dans le but d'obtenir un devis avec prix et délai de livraison si vous cherchez le produit Integra Metering AG (formerly Aquametro) - PN: 91903 Type: VZO 20FL 130/25-INO,01, Compteur d'huile . Nous pouvons également vous proposer des produits d'autres marques et fabricants avec les meilleurs conditions de vente. Grâce à notre réseau de partenaires en Allemagne et à l'étranger, nous essayons de vous donner des prix compétitifs et des délais de livraison courts pour Integra Metering AG (formerly Aquametro) - PN: 91903 Type: VZO 20FL 130/25-INO,01, Compteur d'huile . Mais notre entreprise n’est pas un distributeur officiel sous contrat.
Les marques et les produits indiqués sur notre site sont des exemples à tittre informatif. Nous respectons strictement les droits de propriété privée des constructeurs respectifs.
Notre société n'est pas un distributeur agréé. Tous droits sont réservés aux fabricants et à leurs partenaires officiels.
Nominal flow: Qn = 10; Nominal diameter: DN 40; Reporting: 1 liter of 1impuls
Nominal flow: Qn = 6; Nominal diameter: DN 32; Reporting: 1 liter of 1impuls
Nominal flow: Qn = 6; Nominal diameter: DN 32; Reporting: 1 liter of 1impuls
Nominal flow: Qn = 6; Nominal diameter: DN 32; Reporting: 1 liter of 1impuls
(CONTOIL ® fuel oil meters Reed pulser Pulse value 12.5 ml Nominal diameter: 8 mm With female thread for Kupferrohrverschr. 1/4 " Nominal pressure: PN 25 Maximum permissible temperature: 60 ° C Mounting position: horizontal / vertical Largest flow Qmax. 200 l / h In continuous operation: 135 l / h Error of measurement: 4-200 l / h ± 1% of measured value Pulse value: 0.0125 l)
VZO 15... 40 avec filetage, PN 16
Fuel-oil fuel meter
compteur d'huile
[AMBUS IS M-Bus Impulssammler 1 Impulseingang 2 Leiter M-Bus Schnittstelle 2 Leiter Energieversorgung aus AMBUS ZS oder Net]
PMG 32-RH1 6.0_260_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0,075 m³ / h Continuous flow qp: 6 m³ / h Maximum flow qs: 12 m³ / h Kvs-value: 12.7 m³ / h Pressure loss at qp: 0,22 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004
94252 PMGF 32-RH1 5.0_150_1 1/4"
Size: DN 32 with thread 1 1/2 "(for screw 1 1/4") Nominal pressure: PN 16 bar length: 150 mm Mounting position: vertical falling temperature max .: 130 ° C Maximum flow qs: 6.3 m3 / h Nominal flow qp: 5 m3 / h minimum flow qi: 0.1 m3 / h pulse value: 1 l Smallest readable amount: 0.1 l registrable: 99,999 m3 measuring principle: multi-jet impeller, dry running With CE marking
PMGS 32-RH1 5.0_150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical ascending Riser counter Temperature: max. 130 ° C Nominal pressure: PN 16 Minimum flow qi: 0.1 m³ / h Continuous flow qp: 5 m³ / h Maximum flow qs: 6,3 m³ / h Kvs-value: 13.6 m³ / h Pressure loss at qp: 0,14 bar Pulse value: 1 liter / pulse Environmental class C according to EN 1434 no inlet: 0 x DN 32 no outlet flow: 0 x DN 32 Approval MI-004
MeiStream RUBIN Kaltwasserzähler Nenngrösse: DN 50 Flanschanschluss: EN 1092-1 Nenndruck: PN 16 bar Baulänge: 200 mm Einbaulage: horizontal/vertikal Schutzart: IP 68 Temperatur max.: 50°C Überlastungsdurchfluss Q4: 90 m3/h Dauerdurchfluss Q3: 50 m3/h Übergangsdurchfluss Q2: 0.4 m3/h Kleinster Durchfluss Q1: 0.15 m3/h Kleinste ablesbare Menge: 0.5 l Registrierfähigkeit: 1 Mio m3 Messprinzip: Woltman-Turbine Messbereich Lieferkennzeichnung: R 100
PMW-basic 32 10._260_1 G1 / 4; Multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 260 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 12.7 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001
PMWF-basic 32 10._150_1 G1 / 4 multi-jet vane hot water meter in glanded Thread connection: G 1 1/2 " Nominal size: DN 32 Mounting length: 150 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.1 m³ / h Permanent flow Q3: 10 m³ / h Maximum flow Q4: 12.5 m³ / h Kvs-value: 10.3 m³ / h Pressure loss in Q3: 900 mbar Measuring range: R 100 Inlet section: 0 x DN 32 Outlet flow: 0 x DN 32 Degree of protection: IP 66 Approval MI-001
PMW-basic 16._300_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Thread connection: G 1 " Nominal size: DN 40 Mounting length: 300 mm Mounting position: horizontal Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0.16 m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 25.6 m³ / h Pressure loss in Q3: 400 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
PMWS-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical ascending Riser counter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 20.8 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
PMWF-basic 16._200_1 40 1/2 ''; Multi-jet vane hot water meter in glanded Connection thread: G 2 " Nominal size: DN 40 Mounting length: 200 mm Mounting position: vertical falling Pipe meter Temperature max. 90 ° C. Nominal pressure: PN 16 Minimum flow Q1: 0,16m³ / h Permanent flow Q3: 16 m³ / h Maximum flow Q4: 20 m³ / h Kvs-value: 22.2 m³ / h Pressure loss in Q3: 600 mbar Measuring range: R 100 Inlet section: 0 x DN 40 Outlet flow: 0 x DN 40 Degree of protection: IP 66 Approval MI-001
CE test water meter R49 DN15-32
CE test water meter R49 DN40-50
ART.NO. 80113/2008 AQUAPULS 1L
Electronic reading system IP68
Last crop per meter
ART.NO. 92042 VZO 15 RC 130/16-RV0,1
Compteur de mazout
ART.NO. 92048 VZO 20 RC 130/16-RV1
CONTOIL® oil meter VZO 20 RC 130/16-RV 1 Ring piston meter for mineral oil, with rotatable roller counter
P/N 92280 Aquametro Oil Meter
G/E F.O SUPPLY FLOW METER
[CONTOIL ® fuel oil meters Reed pulser Pulse value 1.25 ml Nominal width: 4 mm With internal thread copper pipe: 1/8 " Nominal pressure: PN 25 Maximum permissible temperature: 50 ° C Mounting position: horizontal / vertical Largest flow Qmax. 80 l / h In continuous operation: 50 l / h Error of measurement: 1-80 l / h + / - 1% of the measurement error Recording capacity Roller 100 000 liters With built-on Reed pulser RE max:. 48V AC / DC, max. 50 mA, max. 3 VA Pulse value: 0.00125 l]
vzo-4 fuel counter
MOTOR AC230V 50/60HZ DN25 WITH CAPACITOR AND GEAR FOR ACTUATOR TYPE: 2KN:
fuel counter gear
